LG Electronics Installing/Using USB Drive in Microsoft Windows 98/98SE, Installing USB Driver

3.Select to remove hardware.

4.When your computer indicates it is acceptable to remove hardware, then unplug the USB Drive from the USB port.

Caution: Never remove or unplug USB Drive while the Red Status LED is flashing. Doing this may cause corruption of the data being transferred.

Installing/Using USB Drive in Microsoft Windows 98/98SE

For Microsoft Windows 98/98SE, you need to install new drivers for the USB Drive to operate. If you do not have the driver installation CD-ROM, you can download it from www.lge.com.

Installing USB Driver

1. Start Windows 98 or Windows 98SE.

2.Insert the provided CD into CD-ROM Drive.

3.Click [SecureCell Utility] in the CD.

(Not insert USB Drive to USB port of your PC, Include Windows 98/98SE Device Driver)

4.The Install Shield Wizard of Windows98 Device Driver or SecureCell Utility appears , as shown in the following figure.

7