LG Electronics UX380 manual Deposited in the heads, Model of the human head, Standardized SAR test

Safety

	Techniques”, sets forth the first
	consistent test methodology for
	measuring the rate at which RF is
	deposited in the heads of
	wireless phone users. The test
	method uses a tissue-simulating
	model of the human head.
	Standardized SAR test
	methodology is expected to
	greatly improve the consistency
	of measurements made at
	different laboratories on the
	same phone. SAR is the
	measurement of the amount of
	energy absorbed in tissue, either
S a	by the whole body or a small
f e	part of the body. It is measured
ty
	in watts/kg (or milliwatts/g) of
	matter. This measurement is used
	to determine whether a wireless
	phone complies with safety
	guidelines.

9.What steps can I take to reduce my exposure to Radio Frequency energy from my wireless phone?

If there is a risk from these products — and at this point we do not know that there is — it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to Radio Frequency (RF) energy. Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off

84