DISASSEMBLY
NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power supply cord from the wall outlet.
•Almost all the parts of this vacuum cleaner can be
disassembled with a screw driver and each connecting component easily fits each other.
Disassemble one by one referring to the exploded view.
• If possible, don’t disassemble except for the necessary parts. It is not necessary to disassemble the parts that are not detailed in the exploded view.
1. Body Cover Assembly Replacement
1) Remove the dust tank from the set.
2) Bring out the motor and disconnect the lead wires from it.
Motor Ass'y 
2) Remove the four screws fastening the body base.
3. Cord Reel Assembly Replacement
1) Remove the cord reel cover by unfastening the screw.
3) Disassemble the filter cover, widening the both of filter cover, and then pull out the lead wires from the push switch.
2) Lift the cord reel assembly from the body base.
2.Motor Assembly Replacement
1)Unhook the motor housing cover in the direction of the arrow.
Cord Reel Ass'y
5
