VX3100
47
VX3100
46
1 Next to automatically store the number in the first
available memory location, or enter a specific three-
digit memory location and then press Soft Key 1 to
store the number.
7. Select the desired description: Home, Office, Mobile,
Pager, or Data/Fax by using .
8. Enter a name for the phone number (up to 16
characters). If you do not want to enter a name, go
to the next step.
9. You may select the desired ID ring type and secret
setting using .
10. Press Soft Key 1 Save, a confirmation prompt is
displayed.
Prepending a SStored NNumber
Prepend can be used if you are out of your home system
area and need to add the area code to an existing phone
book number. When a phone book entry or message
callback number shows up on the display, you can add to
the beginning of the original number. However, you
cannot edit the original number.
1. Recall a number in memory.
2. Enter the prepend digits and the phone number.
3. Press .
Advanced PPhone BBookFea ture s

Pause

When you call automated systems such as voicemail or
credit billing numbers, you often have to enter a series of
numbers. Instead of entering these numbers by hand, you
can store the numbers in your phone book separated by
pauses using special characters (H, T)
There are two different types of pauses that you can use
when storing a number; hard and 2-second:
Hard pause (H)
The phone stops dialing until you press Soft Key 1,
Resumeto advance to the next number.
2-sec pause (T)
The phone waits two seconds before sending the next
number.

Storing a number with pauses

1. Enter the phone number.
2. Press Soft Key 1 Option.
3. Select hard or 2-sec pause.
4. Enter additional number(s) (e.g., pin number or
credit card number).
5. Press Soft Key 1 twice and the sub-menu appears.
Select Save on the sub-menu.
6. The phone prompts you for the memory location
where the number should be saved. Press Soft Key
A
DDITIONAL
F
UNCTIONS
VX3100.qxd 4/26/03 12:21 PM Page 46