Using Phone Menus

New Message (Menu )

Allows you to send text messages, pages, and e-mail transmissions. Each message has a destination (Address 1) and information (Message). These are dependent upon the type of message you want to send.

The basics of sending a Text Message

1.Press Left Soft Key Menu.

2.Press Messages.

3.Press New Message.

4.Enter the message destination in Address 1.

SMS phone number for a text message.

E-mail address for an e-mail message.

5.Press .

NOTE: To send a page, press Left Soft Key Send now.

6.Press to access the message screen.

7.Type your message (text or e-mail) then press .

8.Press Left Soft Key Send.

A confirmation message is displayed.

NOTE: If you send an SMS message to a phone without SMS, you will still be notified that the message was sent, however the message will not be received.

Customizing the Text Message using options

1.Create a new message.

2.Press Right Soft Key Options.

3.Select the option(s) to customize.

Send

Sends the message.

Priority

Gives priority to the message.

 

Normal / Urgent

Callback # Inserts a pre-programmed callback

 

number with your message.

 

On / Off / Edit

Deferred

Delays sending the message until

 

the programmed time frame.

 

Immediate / After 3 days / After 2 days

 

/ After 1 day / After 12 hours / After 2

 

hours / After 1 hour / After 30 minutes

Validity

Validates delivery to the Short Message

 

Center (SMC) without being transmitted to

the destination address for certain periods of time. Those messages will be deleted within the programmed time frame.

Default / 3 days / 2 days / 1 day / 12 hours / 2 hours / 1 hour / 30 minutes

Delivery Notice Allows you automatically acknowledge properly delivered Messages to the recipient.

 

Enhanced / On

Save

Saves the message into the saved folder.

Erase Field

Deletes address or contents of

 

message field.

4. Complete and send the message.

68

VX4600

VX4600

69

Page 36
Image 36
LG Electronics VX4600 New Message Menu, Press Messages Press New Message, Callback # Inserts a pre-programmed callback