LG Electronics W2043TE, W1943TB owner manual W1943SB/W2043SE/W2243S

Connecting the Display W1943SB/W2043SE/W2243S

Connecting with the PC

1.	Before setting up the monitor, ensure that the power to the monitor, the computer
2.	system, and other attached devices is turned off.
	Connect signal input cable 1 and power cord 2 in order, then tighten the screw

of the signal cable.

AConnect D-sub(Analog signal) Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

When using a D-Sub signal input cable connector for

Macintosh

Mac adapter : For older Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

Varies according to model.

Wall-outlet type

A

PC

3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

Power Button

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

9