LG Electronics W1943TB AUTO/SET Button, Power Indicator, Control Panel Functions, SOURCE Hot key

Control Panel Functions

Buttons Use these buttons to select or adjust functions in the On Screen Display.

Use this function to select optimal image conditions in accordance with the surrounding environment (Brightness, Image type).

For more information, refer to page 15.

	When two input signals are connected, you can select the
(SOURCE Hot key)	input signal (D-SUB/DVI) you want. When only one signal
	is connected, it is automatically detected. The default
	setting is D-Sub.(Only W1943TB/W2043TE/W2243T )

AUTO/SET Button

Use this button to enter a selection in the On Screen Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). (Only Analog Mode)

This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).

The best display mode is

W1943SB/W1943TB : 1360 x 768

W2043SE/W2043TE : 1600 x 900

W2243S/W2243T : 1920 x 1080

Power Button & Use this button to turn the display on or off.

Power Indicator

The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking red.

11