6The cabinet should be installed with a very slight tilt
(about 1/2") downward toward the outside | Screw(Type B) 6 |
| |
(See Fig. 5). |
|
Adjust the bolt and the nut of Sill Support for |
|
balancing the cabinet. |
|
7Attach the cabinet to the window stool by driving
the screws 
(Type B: Length 16mm (5/8 inch) and below.) through the front angle into window stool.
8 Pull each Frame Curtain 
fully to each window sash track, and repeat step 2.
"/2 1About Sill Support 2
Sash track
ENGLISH
Sill Support 2
9Attach each Frame Curtain 
the window sash using screws 
(Type C). (See Fig. 6)
Front Angle
Screw(Type B) 6
Fig. 5
Type C 7
CAUTION: Do not drill a hole in the bottom pan. The unit is designed to operate with approximately 1/2" of water in bottom pan. There is no need to add water if the pan is dry.
10Slide the unit into the cabinet. (See Fig. 7)
CAUTION: For security purpose, reinstall screws (Type A) at cabinet's sides.
11Cut the 
to the proper length and insert between the upper window sash and the lower window sash. (See Fig. 8)
Fig. 6
Screw(Type A)
Power cord | Screw | Fig. 7 | |
(Type A) | |||
|
|
Fig. 8
19
