NO WATER SUPPLY
Is water supply
| NO |
Is the tap opened? | |
| YES |
When you press both SPIN SPEED button and | |
SOIL LEVEL | button simultaneously, is the water |
level frequency below 246? | |
| NO |
Is the inlet valve filter clogged? | |
| NO |
Is resistance between each terminal of INLET | |
VALVE ASSEMBLY | kΩ? |
YES
NO
YES
YES
NO
Open the tap.
Check the AIR CHAMBER and the tube (clogged).
Clean the filter.
Replace the INLET VALVE
ASSEMBLY.
Verify the voltage of the inlet valve connector is |
|
120V AC. | NO |
(Refer to |
|
Check electrical connection. Replace the MAIN PWB
ASSEMBLY.
DETERGENT DOES NOT FLOW IN
Is water supplied?
YES
Are receptacles correctly connected to the terminals of the INLET VALVE ASSEMBLY?
YES
Has detergent been put in the correct compartment of the dispenser?
YES
Is the detergent caked or hardened?
NO | Refer to | |
NO WATER SUPPLY | ||
| ||
NO |
| |
| ||
Check the wiring. | ||
|
|
Put the detergent in the correct place.
NO
YES Clean the dispenser.
26
