Optional Color Touch-Screen Interface
The controls of the HiSwitch2 are intuitive and simple. The
This optional color LCD monitor is divided into three segments. In addition to a system mimic diagram, there is a Status/Alarm panel and a section dedicated to operator instructions and menus. You benefit from improved operator effectiveness, reduced training time, and less chance of operator error.
Liebert Experience: Greater Overall Value
The design of the HiSwitch2 reflects our decades of leader- ship in critical power and environmental system architecture:
Conservative design margins and excellent overload capacity. Can also be placed against a wall or partition.
Designed for maintainability, with all
Internal CANBUS protocol:
Full range of communications options to fit any monitoring strategy for the Optional LED Panel.
The Liebert Experience means a wider variety of power system solutions from one source. Ask your Emerson Network Power representative for information about Liebert range of Power Quality Solutions.
All components are thoughtfully arranged for straight forward installation and maintenance. For units up to 600 amps, the entire power and control module can be removed as an assembly. Note the separate compartment for option modules, upper right, for safe and convenient field access.
Standard LED Panel
In case you need simplified version of interface, the Standard LED Panel is a good and economic solution for the customer. It is possible to monitor the unit and alert when a problem occurs by means of a series of LEDs and buttons. Both optional and standard Panel solutions can be accessed from a terminal, or a PC running terminal emulation soft- ware, that is attached to the unit.
SYSTEM#1 | SYSTEM#2 | ||
| Bypass |
| Bypass |
| Mains |
| Mains |
Normal | Normal | Normal | Normal |
Mains | Mains | Mains | Mains |
UPS #1 | UPS #6 | UPS #1 | UPS #6 |
HiSync
HiSwitch2
#1
Critical Load
HiSwitch2
#2
Critical Load
Dual Bus System Configuration
03
Liebert HiSwitch2 - Digital Static Transfer Switch
