Liebert IntelliRack Hardware and Components, Dimensions, Wiring Specifications, Top View, supply

Hardware and Components

IntelliRack								Universal power
	OUT Bridging IN	AC Low Transmit Receive	12PowerV DC 1.5A		IntelliRack			supply
			+	Inputs—	:
EMERS ON UPS		Fail Battery (TX) (RX)
MP-ADP-02 adapter
(DB9-to-RJ45)
RJ45 cable (2 provided)				EMERS ON UPS			Fail Battery (TX) (RX)	+Power Inputs—	:
Connect to UPS					Bridging	IN	AC Low Transmit Receive	12 V DC 1.5A	IntelliRack
					OUT

120V or 230V power cord (120V shown)

120V or 230V power cord (230V shown)

MP-ADP-01 adapter (DB9-to-RJ45) Connects to UPS: either A or B below, depending on type of UPS

A (for UPS with DB9 port)

RJ45 cable (2 provided) Daisy-chain to another

IntelliRack

OR B

(for UPS with no DB9 port)

Universal power supply

MP-ADP-01 connects to DB9 port of UPS

Dimensions

9"

(228.6mm)

MP-ADP-01 adapter connects to open-wire adapter (SNS3ADPT, at left)* which connects to UPS

* Item purchased separately

TOP VIEW SIDE VIEW

9"

(228.6mm)

16"
(406.4mm)	1.66"
	(42.2mm)

FRONT VIEW

1.66"

(42.2mm)

16"

(406.4mm)

Wiring Specifications

Connection	Provided / Purchased Separately	Maximum Length*
RJ45 cable to connect UPS to MultiPort	6 & 25 ft. (1.8 & 7.6m); 2 cables provided	300 ft. (91m)
RJ45 cable to connect Bridging Port
MultiLink / AS400 cable	10 ft. (3m); Purchased separately	100 ft. (31m)
* For longer cables, refer to the IntelliRack user manual.

Ordering Information

Quantity	Part #	Description
	INTELLIRACK	IntelliRack unit, two DB9-to-RJ45 adapters, two RJ45 cables, a universal power supply and
		two line cords (120V & 230V)
	IRACKUNIVPS	Secondary power connection for the IntelliRack’s redundant port (requires 12VDC)
	MULTIPORT4	MultiPort 4 kit with one MultiPort 4 card and one molded cable assembly with four connectors
	IRACKMLADPT	Liebert MultiLink Cable Adapter Kit with two DB9-to-RJ45 adapters

SL-31094 Product Specification/Installation Sheet page 2 2/04 (Rev. 0)