Malfunctions
Your appliance is designed and manufactured for a lengthy, reliable operating life with no malfunctions. If a malfunction nonetheless occurs during operation, check whether it is due to an operating error.Please note that even during the warranty period the resultant servicing costs in this case will have to be borne by the owner.
You may be able to rectify the following faults by checking the possible causes yourself:
•Appliance does not function: the control lamps are not lit.
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the socket fuse intact?
•Loud running noise:
–Is the appliance set up firmly on the floor?
–Does the appliance cause nearby items of furniture or objects to vibrate? Please note that noises caused by the refrigerant circuit cannot be avoided.
•The temperature is not low enough:
–Is the temperature setting correct (see "Setting the tempera- ture")?
–Have excessive amounts of fresh food been placed in the appli- ance? Observe the temperature display for a further 24 hours.
–Does the separately installed thermometer show the correct reading?
–Is the ventilation system working properly?
–Is the appliance set up too close to a heat source?
If none of the above causes apply and you cannot rectify the fault yourself, contact the nearest customer service department.
Please state the
appliance designation 1, service number 2, appliance number 3
of the rating plate (see fig.).
The type plate is located in the freezer compartment on the left- hand inside wall, next to the top freezer drawer. Keep the door closed if there is a fault.This will stop cold from escaping and the temperature from rising.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch it off and disconnect the plug or remove the fuse.Clean the appliance and leave the door open in order to prevent unpleasant smells.
The refrigerant circuit has been tested for leaks.
The appliance complies with current safety regulations and EC directives 2006/95/EC and 2004/108/EC.
All types and models are subject to continuous improvement and the manufacturer therefore reserves the right to make modifications to the shape, equipment and technology.
Changing over door hinges
Fig. T: You can change over the door hinges if necessary. Follow the order of the positions illustrated in fig. T.
9
