Liebherr 7083 461-00 manual Be sure the connection is tightly arranged

5.Locate the water hose into the rail of the appliance base.

8.Push the appliance slowly into the recess until the compressor mounting plate touches the anti-tipping bracket.

5. 8.

6.Route the mains cable towards the socket.

7.Route the water hose towards the water shut-off tap.

WARNING!

Do not connect the appliance to the power supply until the installation is completed.

CAUTION!

Lay the mains cable and the water hose in such a way that they will not be damaged when the appliance is slid into the installation recess.

6. 7.

9.Fill the hose with water and connect to the shut-off tap.

Be sure the connection is tightly arranged.

Open the shut-off tap and check the system for leakage.

Important!

After the ice maker has been switched on, the water supply system must be bled. See the section Bleeding the ice maker in the operating instructions.

6