Leveling the appliance
1.Adjust the height of the appliance at the front by twisting the leveling feet 1. Use the
Position the spanner accordingly(1).
2.Adjust the height of the appliance at the rear by turning the ad- justing bolts 2. Use a 1/4" box spanner or the Torx 25 wrench provided.
3.Rotate leveling feet 1until firmly in place against the floor.
WARNING!
To prevent the appliance from tipping forward the level- ing feet 1must have contact with the floor.
Adjusting the refrigerator door
The lateral tilt of the refrigerator door can be adjusted if required. Undo screws 1. Adjust the lateral tilt using the grub screw 2 (Allen key A/F 2.5).
Adjusting the front of the drawer
If required, the front of the freezer drawers can be adjusted. Transfer the screws shown in the illustration (on the left and right sides of the freezer drawer) individually to the long slots below. Tighten the screws in the front of the drawer once it is in the right position.
Fastening the appliance in the recess
Once in the recess, secure the appliance to the body of the unit using the securing plates (4 x 16 screws).
Then click the covers sup- plied into place.
Side view of the freezer drawer pulled out
7
