Refrigerator Compartment
Vegetable Drawer - Figure 9 |
|
| Replacing the bulb: | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 9
To remove the vegetable drawer:
Pull the drawer straight out, grip at the back and lift out.
To install the vegetable drawer:
Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.
Interior Light
This turns OFF automatically after the door has been opened for approximately 15 minutes. If it does not turn ON when the door is opened briefly, but the temperature display is working, the bulb(s) may be defective.
The light is located behind the cover located at the top of the refrigerator compartment and has two bulbs.
Bulb data:
120 V, Maximum wattage - 25 W Bulb fitting - E14
Current and voltage must agree with details on the model plate.
To prevent possible injury due to an electrical shock, be sure to discon- nect the power cord or turn OFF the circuit breaker before replacing the interior light bulb(s) or cleaning the appliance.
To prevent possible injury due to broken glass, use hand protection when replacing the interior light bulb(s).
2
1
3
Figure 10
1.Remove the two screws securing the cover (Fig. 10, 1). Pull the cover straight out.
2.Remove the glass plate (Fig. 10, 2).
3.Remove the defective bulb. Make sure the seal (Fig. 10, 3) is placed on the new bulb before installing it.
4.Install the glass plate and cover.
13
