Liebherr CS16 Operation, Turning the Appliance ON and, Changing the Temperature, OFF - Figure

Operation

Turning the Appliance ON and

OFF - Figure 2

Clean the appliance before turning it on for the first time. See Cleaning.

Allow the appliance to operate approximately two hours before placing food in it. DO NOT place fro- zen food in the freezer until the temperature shows at least 0°F / -18°C. The refrigerator and freezer compartments can be operated separately.

1.Turning ON: Press the Refrigerator ON/OFF button 9and the Freezer ON/OFF button 3so the Temperature Displays 1and 7light up or “flash.”

•The interior light will turn ON when the refrigera- tor door is open.

•The alarm will sound when the freezer is turned ON for the first time and when the appliance is “warm.”

2.Press the Alarm button 5to turn it OFF. See Audible Warning Signal.

3.Turning OFF: Press the Refrigerator ON/OFF button 9and the Freezer ON/OFF button 3 again so the temperature displays go out.

Changing the Temperature

Display - Figure 2

The temperature reading can be displayed in either degrees Fahrenheit or degrees Celsius.

When the appliance is first turned on or after a power failure, the refrigerator Temperature Display and Setting Display 7will show the set tempera- ture display, either degrees Fahrenheit or degrees Celsius, for five seconds. Then, the actual tempera- ture is displayed.

To change the temperature display:

1.Press both the Alarm button 5and the DOWN Refrigerator Temperature button 8for seven seconds. The set temperature display will blink six times.

2.While the temperature display is blinking, press both buttons again and the temperature display will change.

3.After making the change, the new temperature display will blink six times. Then both tempera- ture displays will show the actual temperature value.

Setting the Temperature - Figure 2

The appliance is pre-set for normal operation. We recommend temperatures of 39°F (4°C) in the refri- gerator and 0°F (-18°C) in the freezer.

To reduce the temperature:

Press the DOWN button on the left to redu- ce the refrigerator temperature 8and the DOWN button on the right to reduce the freezer temperature 2.

To increase the temperature:

Press the UP button on the left to increase the refrigerator temperature 8and on the right to increase the freezer temperature 2.

1.While you are entering the temperature, the set temperature will flash on the display.

2.When you press the temperature setting buttons for the first time, the most recent setting (known as the “reference setting”) is displayed.

3.You can change the settings in increments of 1°F (1°C) by briefly pressing the buttons again. If the buttons are held down the temperature set- ting will change faster.

4.Approximately five seconds after the button has been released, the display will automatically show the actual freezing or cooling temperature (known as the “actual setting”).

5.You can change the temperatures:

•In the refrigerator – between 36°F and 44°F (2°C and 7°C) and

•In the freezer – between -15°F and 6°F (-26°C and -14°C).

Figure 2

9