CI_16_CS_16 Use Manual.qxd 1/12/2004 3:08 PM Page 13

ICEMAKER

To Start the IceMaker

The IceMaker will only work if the combined refrigerator-freezer is connected to the electrical outlet. It will only make ice cubes if the freezer compartment is operating.

The IceMaker is in the top left drawer in the freezer compartment of the combined refrigerator-freezer. You can identify this drawer by its labeling “IceMaker.”

To turn on

•Pull out the drawer.

•Press the “ON/OFF” button so the control lamp comes on (Figure 12).

•Close the drawer.

Note

The icemaker can only make ice cubes if the drawer is completely closed.

Figure 12

To turn off

If you do not need any ice cubes, the icemaker can be turned off independently of the freezer compartment.

•Press the “ON/OFF” button for approximately 1 second so the control lamp goes out.

Note

If the icemaker is turned off, the empty drawer can also be used to freeze and store food.

The production capacity depends on the temperature inside the freezer compartment. The lower the temperature, the more ice can be produced over a period of time.

The ice cubes fall out of the icemaker into the drawer. When the ice reaches a certain level in the drawer, the appliance stops producing ice automatically.

If you need a large quantity of ice you can change out the drawer to the right with the complete “IceMaker” drawer. When you close the drawer the icemaker will immediately start production.

To Clean the IceMaker

The IceMaker (arrow in Figure 13) can be cleaned by using this procedure.

1.Pull out the drawer and remove the ice.

2.Clean the drawer with warm water and mild dish detergent.

3.To access the IceMaker for cleaning:

a.With the drawer pulled out, press and hold the “ON/OFF” button until the LED goes out (takes about 1 second).

b.Continue to hold the button and after 10 seconds the LED will start to flash.

c.Insert the drawer while the LED is flashing. The IceMaker should rotate down into the cleaning position.

d.Remove the drawer.

4.Clean the IceMaker with warm water. If you need to use a cleaning aid, use a mild dish detergent and rinse. You will need to throw out the first three batches of ice if you use any soap.

5.Push the “ON/OFF” button until the LED lights and insert the drawer.

6.Throw out the first three batches of ice to remove any soap residue.

Note

If you need to leave the IceMaker off, clean the IceMaker but do not push the “ON/OFF” button in Step 5.

To make ice cubes

After you start the icemaker for the first time it may take up to 24 hours before the first ice cubes are ready.

Note

The first three batches of ice must not be consumed or used.

Figure 13

CI 16/CS 16

13

Page 17 Page 19
Page 18
Image 18
Liebherr CI16, CS16 manual To Start the IceMaker, To Clean the IceMaker, To turn on, To turn off, To make ice cubes
Page 17 Page 19

CS16, CI16 specifications

Liebherr, a name synonymous with high-quality engineering and innovation in the machinery and construction industry, has made waves with its latest models, the CI16 and CS16. These compact excavators are designed to deliver superior performance and efficiency in various applications, making them a popular choice among contractors and operators alike.

The Liebherr CI16 and CS16 are equipped with powerful diesel engines that provide ample horsepower while ensuring low fuel consumption and emissions. The machines are built with an emphasis on energy efficiency, adhering to the latest environmental regulations without compromising on performance. The engines support advanced technologies such as common rail fuel injection and turbocharging, which enhance power output and efficiency.

One of the standout features of the CI16 and CS16 models is their compact design, allowing operators to maneuver easily in confined spaces. This is particularly beneficial in urban environments or restricted job sites where larger machinery may struggle. Despite their smaller size, these excavators boast impressive digging and lifting capacities, making them capable of handling a wide range of tasks, from excavation to landscaping and trenching.

The ergonomic cab design of both models ensures that operators enjoy a comfortable working environment. The spacious cabin is equipped with adjustable seating, climate control, and advanced visibility, providing a clear line of sight to the work area. The intuitive controls enable precise operation, reducing operator fatigue and enhancing productivity throughout the workday.

Both CI16 and CS16 feature advanced hydraulic systems that provide quick response times and smooth operation. The option to customize hydraulic flow allows operators to tailor the machine's performance based on the attachments being used, maximizing versatility. Various attachments are compatible, including buckets, hammers, and grapples, further extending the utility of these machines.

Safety is paramount in the design of the Liebherr CI16 and CS16. Each excavator is equipped with features such as a reinforced cab structure, emergency stop buttons, and advanced monitoring systems. These ensure both operator safety and the protection of job site personnel.

Overall, the Liebherr CI16 and CS16 models represent a blend of power, efficiency, and precision. Their advanced technologies and user-focused design make them ideal for modern construction and landscaping challenges, solidifying Liebherr's commitment to innovation in the machinery industry. Whether for major construction projects or smaller jobs, these excavators offer the reliability and performance that Liebherr is known for.
Top Page Image Contents