Ice Maker, Safety Instructions and Warnings

Ice Maker

Safety Instructions and Warnings

•The ice maker is designed exclusively to make ice cubes in quantities needed by a household and may only be operated with water appropri- ate for this purpose.

•All repairs and work on the ice maker may only be done by customer service personnel or other appropriately trained personnel.

•Do not consume or use the first three batches of ice. This applies both to using the appliance for the first time and also using it after it has not been used for a long period of time.

•The manufacturer cannot accept liability for damage caused by equipment or water lines between the solenoid valve and the water supply.

•The ice maker will only work if the combined refrigerator-freezer is connected to the electrical outlet. It will only make ice cubes if the freezer compartment is operating.

•The ice maker is in the top left drawer in the freezer compartment of the combined refrig- erator-freezer (Figure 5). The ice maker can only make ice cubes if the drawer is completely closed.

Bleeding the Ice Maker

IMPORTANT

To ensure a proper function of the Ice Maker the water pipe system must be purged of any air.

•Pull out the drawer.

•Press the “ON/OFF” button so the control lamp comes on (Figure 23).

•Press the button on the Ice Maker housing (Figure 23) for approx. 3 seconds. The LED above the button starts blinking.

•Press the button again briefly. The LED blinks faster.

•Close the drawer immediately.

The water intake of the appliance opens for 25 seconds and bleeds all air from the pipe system.

•After this the Ice Maker tray (Figure 24) must be emptied. Refer to chapter “Ice Maker at vacations”.

•Finally clean the drawer.

To Start the Ice Maker

To turn the ice maker on

•Pull out the drawer.

•Press the “ON/OFF” button so the control lamp comes on (Figure 23).

•Close the drawer.

After you start the ice maker for the first time it may take up to 24 hours before the first ice cubes are ready.

Note

The first three batches of ice must not be con- sumed or used.

The production capacity is 90 - 100 ice cubes in

24 hours at a temperature of 0°F inside the freezer compartment.

To have the maximum capacity of approx. 140 ice cubes in 24 hours, activate the SuperFrost function.

Be aware that this increases the energy con- sumption because the compressor will run con- stantly.

The ice cubes fall out of the ice maker into the drawer. When the ice reaches a certain level in the drawer, the appliance stops producing ice automati- cally. The ice maker will not fill the drawer to the top.

If you need a large quantity of ice you can change out the drawer to the right with the complete IceMaker drawer.

To turn the ice maker off

If you do not need any ice cubes, the ice maker can be turned off independently of the freezer com- partment.

•Press the “ON/OFF” button for approximately 1 second so the control lamp goes out.

Note

If the ice maker is turned off, the empty draw- er can also be used to freeze and store food.

Figure 23

CS1660 specifications

The Liebherr CS1660 is a powerful and versatile crawler crane designed for heavy lifting in various construction and industrial applications. Renowned for its exceptional performance, the CS1660 has become a popular choice among contractors due to its advanced features and technologies.

One of the standout characteristics of the CS1660 is its impressive lifting capacity. With a maximum load capacity of 160 tons, this crane can handle a wide range of materials and equipment, making it suitable for tasks such as building construction, infrastructure development, and heavy machinery installation. The crane’s robust design and innovative engineering ensure stability and reliability, even when working on challenging job sites.

The Liebherr CS1660 is equipped with state-of-the-art hydraulic systems that provide powerful lifting capabilities and precise control. The crane features a multi-functional control system that allows operators to manage the machine’s movements seamlessly. This technology enhances operation efficiency, reducing the time required to complete complex lifting tasks. Additionally, the crane’s hydraulic components are designed for durability and low maintenance, ensuring that the CS1660 remains operational over extended periods.

Another key feature of the CS1660 is its modular design, which enables easy transport and setup. The crane can be disassembled into manageable components, allowing for convenient transportation to and from job sites. This modularity also means that the crane can be configured for various applications, providing flexibility for contractors who need to adapt to different project requirements.

The CS1660 also prioritizes operator safety and comfort. The cab is designed with ergonomic features, providing the operator with excellent visibility and easy access to controls. The advanced monitoring system provides real-time data on various operational parameters, enhancing safety and efficiency during lifting operations.

In summary, the Liebherr CS1660 crawler crane stands out for its powerful lifting capabilities, advanced hydraulic systems, modular design, and operator-friendly features. Its versatility makes it a valuable asset in the construction industry, ensuring that it can meet the demands of modern heavy lifting challenges while maintaining high safety standards.

Liebherr CS1660 manuel dutilisation Safety Instructions and Warnings, Bleeding the Ice Maker

Models: CS1660