ICEMAKER

To Start the IceMaker

The IceMaker will only work if the combined refrig- erator-freezer is connected to the electrical outlet. It will only make ice cubes if the freezer compartment is operating.

The IceMaker is in the top left drawer in the freezer compartment of the combined refrigerator- freezer. You can identify this drawer by its labeling “IceMaker.”

To turn on

•Pull out the drawer.

•Press the “ON/OFF” button so the control lamp comes on (Figure 17).

•Close the drawer.

Note

The icemaker can only make ice cubes if the drawer is completely closed.

Figure 17

To turn off

If you do not need any ice cubes, the icemaker can be turned off independently of the freezer compart- ment.

•Press the “ON/OFF” button for approximately 1 second so the control lamp goes out.

Note

If the icemaker is turned off, the empty drawer can also be used to freeze and store food.

The production capacity depends on the tempera- ture inside the freezer compartment. The lower the temperature, the more ice can be produced over a period of time.

The ice cubes fall out of the icemaker into the drawer. When the ice reaches a certain level in the drawer, the appliance stops producing ice automati- cally.

If you need a large quantity of ice you can change out the drawer to the right with the complete “IceMaker” drawer. When you close the drawer the icemaker will immediately start production.

To Clean the IceMaker

The IceMaker (arrow in Figure 18) can be cleaned by using this procedure.

1.Pull out the drawer and remove the ice.

2.Clean the drawer with warm water and mild dish detergent.

3.To access the IceMaker for cleaning:

a.With the drawer pulled out, press and hold the “ON/OFF” button until the LED goes out (takes about 1 second).

b.Continue to hold the button and after 10 sec- onds the LED will start to flash.

c.Insert the drawer while the LED is flashing. The IceMaker should rotate down into the cleaning position.

d.Remove the drawer.

4.Clean the IceMaker with warm water. If you need to use a cleaning aid, use a mild dish detergent and rinse. You will need to throw out the first three batches of ice if you use any soap.

5.Push the “ON/OFF” button until the LED lights and insert the drawer.

6.Throw out the first three batches of ice to remove any soap residue.

Note

If you need to leave the IceMaker off, clean the IceMaker but do not push the “ON/OFF” button in Step 5.

To make ice cubes

After you start the icemaker for the first time it may take up to 24 hours before the first ice cubes are ready.

Note

The first three batches of ice must not be con- sumed or used.

Figure 18

17

Page 16 Page 18
Page 17
Image 17
Liebherr CS 16 manuel dutilisation To Start the IceMaker, To Clean the IceMaker, To turn on, To turn off, To make ice cubes
Page 16 Page 18

CS 16 specifications

The Liebherr CS 16 represents a significant advancement in the arena of compact wheel loaders, combining robust performance, versatility, and state-of-the-art technology. Designed with a focus on efficiency and operator comfort, the CS 16 is ideal for a variety of applications including construction, landscaping, and agriculture.

One of the standout features of the Liebherr CS 16 is its powerful engine. Equipped with a reliable diesel engine that meets stringent emission standards, this compact loader boasts impressive horsepower, enabling it to handle demanding tasks with ease. The engine is paired with an efficient hydraulic system that ensures rapid and precise operation of attachments, making it perfect for tasks that require speed and accuracy.

The Liebherr CS 16 showcases a compact design, allowing it to maneuver in tight spaces while maintaining excellent stability. Its short wheelbase and low center of gravity enhance handling, making it a top choice for urban construction sites or projects requiring intricate maneuvering. With a lift height optimized for various applications, operators can also expect excellent dumping capabilities when working with materials.

Another notable aspect of the CS 16 is its versatility. The machine is compatible with a range of attachments, such as buckets, forks, and grapples, enabling it to tackle diverse tasks. This adaptability makes it an essential tool for contractors who need a machine that can easily transition from one job to another.

Operator comfort has not been overlooked in the design of the CS 16. The cabin is spacious and ergonomically designed, featuring adjustable seating, intuitive controls, and excellent visibility. This environment reduces operator fatigue, promotes safety, and enhances overall productivity during long working hours.

In terms of technology, the Liebherr CS 16 includes advanced features such as a load-sensing hydraulic system, which optimizes power consumption by adjusting the hydraulic flow according to the specific needs of the task at hand. This innovation not only increases efficiency but also reduces wear and tear on the machine.

Moreover, the compact loader is designed for easy maintenance, with accessible service points that simplify routine checks and repairs, thus minimizing downtime and increasing overall operational efficiency.

In summary, the Liebherr CS 16 is a powerful, versatile, and operator-friendly compact wheel loader, ideal for various applications. Its combination of robust performance, innovative technology, and operator comfort makes it an invaluable asset for any construction or landscaping project.
Top Page Image Contents