Liebherr WU 40 Operation, Operating and Control Elements - Figure, Ventilation Button - Figure

Models: WU 40

1 16
Download 16 pages 483 b
Page 10
Image 10
OPERATION

OPERATION

Operating and

Control Elements - Figure 5

Figure 5

1.Lower compartment temperature display

2.Upper compartment temperature display

3.Lower compartment temperature setting buttons

4.Upper compartment temperature setting buttons

5.Alarm ON/OFF button

6.Interior light ON/OFF button

7.Childproof Lock

8.ON/OFF button

9.Ventilation button

Turning the Appliance

ON and OFF - Figure 6

Clean the appliance before turning it on for the first time. See Cleaning. Connect the appliance to the dedicated outlet - the appliance is turned on.

The alarm will sound when the appliance is turned on for the first time and when the appliance is warm. Press the Alarm button to turn it off. The temperature display will also flash.

To turn the appliance off: Keep the ON / OFF button pressed for three seconds so that the temperature display goes out.

To turn the appliance on: Press the ON / OFF button until the display lights up.

Figure 6

Setting the Temperature - Figure 7

The temperature of both compartments can be set separately.

To reduce the temperature: Press the “DOWN“ button;

-on the left for the upper compartment, on the right for the lower compartment.

To increase the temperature: Press the “UP“ button.

-While you are entering the temperature, the set temperature will flash on the display.

-You can change the settings in increments of 1°F (1°C) by briefly pressing the button again. The electronic controls will switch over automati- cally about five seconds after the last time you pressed the button. The actual temperature dis- plays.

Figure 7

If F0 or F1 appears in the display, the appliance has a fault. Contact your nearest customer service rep- resentative, indicate the type of appliance, index and Appliance / serial number.

Ventilation Button - Figure 8

Should you wish to use the wine cooler to store wine for long periods of time, activate the “Ventilation“ button. The light in the button comes on and the ventilation function is active. Then the climate which corresponds to that of a wine cellar is achieved inside the wine cooler. Bottle corks are prevented from drying out due to an increased level of humidity.

Figure 8

10

Page 10
Image 10
Liebherr WU 40 manual Operation, Operating and Control Elements - Figure, Turning the Appliance ON and OFF - Figure