| INSTALLATION |
Reversing the Door Hinges - Figure 4 |
|
To prevent possible injury from an electrical | To avoid injury from sharp edges, wear pro- |
shock, be sure to disconnect the power cord | tective gloves before performing the follow- |
or turn OFF the circuit breaker before per- | ing steps. |
forming the following steps. |
|
1. Unscrew hinge pin.
2. Lift off the door.
3. Unscrew the ventilation grille.
4. Pull out sleeve and reassemble.
5. Unscrew upper hinge plate, turn it 180° and screw on the opposite side.
6. Unscrew lower hinge plate.
7. Remove screws.
8. Transfer both pins of the hinge plate to the oppo- site side.
9. Insert screws again.
10.Reassemble lower hinge plate on the left side of
the unit.
11. Transfer plug to the opposite side of the door.
12. Suspend door on hinge pin and close.
13. Insert hinge pin and tighten.
14. Transfer handle and plugs to the opposite side.
15. Reassemble the ventilation grille.
Figure 4
9
