FIGURE 8
~3/8 X2"
STEP 8
Loop CABLE(13) around one 3-1/2" PULLEY(4) in the PULLEYBRACKET(2) and SECURELYassemble using one 318 X 2" BOLT(10), and two 3/8" WASHERS(8) and one 3/8" LOCKNLrI" (9) as shownin FIGURE
FIGURE 9
STEP9
¯Removeone existing 3-1/2" PULLEY,two WASHERS, two 2" WHEELSand two SPACERSfrom the ADJUSTMENTTUBEon the 832 LEG PRESS OPTION by unfastening the 3/8 X 4-1/2" BOLTholding the pulley on. See FIGURE9. (NOTE:The pulley will be used in STEP12.)
