REMOVE
FIGURE 6
STEP 6
Removethe existing CABLE(part #68331)using the following steps:
¯Disconnect LATBARfrom TOP BOOM.
¯Unscrew the threaded end of CABLEfrom the HEADPLATEASSEMBLY.
¯Route the CABLEaround the FLOAT~'GPULLEYas shown in FIGURE6.
¯Route the CABLEthrough the TOPBOOMas shown in FIGURE6.
¯The pulleys in TOPBOOMma.v need to be temporarily removed to remove CABLE.
