FIGURE 5
TOWER
TOWER
BRACE
GUIDE
RODS
SHAFT
COLLARS
1/2 X 4” BOLT (EXISTING)
STEP 5:
• Place TOWER BRACE over the GUIDE RODS and securely fasten TOWER BRACE to TOWER using previously removed 1/2” X 4” BOLTS, 1/2”WASHERS, AND 1/2” NUTS as shown in FIGURE 5.
• Slide the SHAFT COLLARS to the top of the GUIDE RODS and SECURELY tighten the SHAFT COLLAR SET SCREWS .
TOWER |
2 |
SHROUD |
FIGURE 6 |
STEP 6:
•Route threaded end of new CABLE (68127) (2) around pulleys in TOWER BRACE, LOWER CROSS SUPPORT, and BENCH FRAME as shown in FIGURE 6.
•Retighten any loosened pulley connections.
•Reassemble SHROUD to the TOWER.
1/2
1/2
1/2
1/2
1/2
1/2
0
1
2
3
4
5
6
6
