Life Fitness OHDPR8 FIGURE 10

STEP 10:

FIGURE 10

• Assemble two SWIVEL SPOTTERS (25) to the BOTTOM UPRIGHT SUPPORT (15) as shown using four 1/2 X 1-1/2” BOL TS (17), four

1/2” FLAT W ASHERS (19), four 1/2” INT T OOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23). See FIGURE 10. (NOTE:

Tighten connection SECURELY then back nut off 1/2 turn.)

17 1/2 X 1-1/2”

Contents

Main PARTS LIST Tools Required for Assembly Bolt Length Ruler NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. * 3/4, 9/16 wrench * Ratchet with 3/4, 9/16 socket * 7/32 Allen Wrench Page STEP 1: FIGURE 1 STEP 2: FIGURE 2 STEP 3: FIGURE 3 STEP 4: FIGURE 4 STEP 5: FIGURE 5 STEP 6: FIGURE 6 Page STEP 8: FIGURE 8 DETAIL 8 STEP 9: FIGURE 9 STEP 10: FIGURE 10 STEP 11: FIGURE 11 STEP 12: FIGURE 12 PREVENTATIVE MAINTENANCE TIPS Clean: Inspect: Lubricate: VISIT US AT: HAMMERSTRENGTH.COM