1.LOOSELY assemble the LOWER BRACE (1) to the RIGHT FRAME (2) and LEFT FRAME (3) using four M10 X 25mm BOLTS (4), eight 3/8" SAE WASHERS (5), and four M10 NYLOCK NUTS (6), as shown.
Repeat the procedure to attach the UPPER BRACE (7) to the RIGHT FRAME (2) and LEFT FRAME (3).
Tighten all BOLTS and NUTS securely.
2.Attach the SEAT FRAME (8) to the UPPER BRACE (7) and LOWER BRACE
(1) using four M10 X 25mm BOLTS (4), eight 3/8" SAE WASHERS (5), and four M10 NYLOCK NUTS (6), as shown. Tighten all BOLTS and NUTS securely.
3.Attach the BACK PAD (9) to the SEAT FRAME (8) using three M10 X 35mm BOLTS (10) and three 3/8" SAE WASHERS (5), as shown. Tighten all BOLTS securely.
4.Attach the SEAT PAD (11) to the SEAT FRAME (8) using one M10 X 35mm BOLTS (10), one M10 X 70mm BOLTS (12) and two 3/8" SAE WASHERS (5), as shown. Tighten all BOLTS securely.
5.Install 1" HOLE PLUGS (13) into all open bolt holes.
