One Disc play
When 2 or 3 CDs are loaded on the disc trays, you can select one particular disc to be played back.
On the unit ONLY:
1 Load CDs.
•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.
2 Press REPEAT repeatedly so that |
|
| |
REPEAT | |
the 1 DISC indicator lights up on |
|
| |
| |
the display. |
|
1 DISC indicator | |
TRACK |
|
WOOFER | 1 DISC |
|
•Each time you press the button, the indication on the display changes as follows:
ALL DISC 1 DISC REPEAT 1*
(initial setting)
REPEAT ALL DISC* REPEAT 1 DISC*
*See page 19.
3 Press one of the disc number CD 1 CD 2 CD 3 buttons (CD1, CD2 or CD3)
you want to listen.
Playback stops when all tracks of the selected disc are played once and resumes to All Disc play.
To stop during play, press 7.
•For MP3 disc, this unit can store the number of the track that you have stopped playback. By pressing CD 6, you can start playback again from the beginning of the same
To remove the disc, press 0.
To exit from One Disc play, press REPEAT repeatedly so that ALL DISC indicator lights up on the display.
The following operations will also cancel the One Disc play and restore All Disc play when—
•Turning off the power,
•Ejecting the carrousel, or
•Changing the source to play.
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press DISC CHANGE to change the CD and the DISC CHANGE carrousel comes out.
If you change CDs during play, the current play will not stop until all CDs you have changed are
played.
To close the carrousel, press DISC CHANGE or 0.
To skip to the another CD in the carrousel
Press DISC SKIP on the remote control.
To stop play for a moment
Press CD 6.
While pausing, “PAUSE” appears on the display.
To resume play, press CD 6again.
To locate a particular point in a track
During play, press and hold 1or ¡.
•1: Fast reverses the disc.
•¡: Fast forwards the disc.
When using the remote control, press and hold 4/1or ¢/¡.
To go to another track
For Audio CD:
Turn the 4/¢control before or during playback.
• 4: Goes back to the beginning of the current or previous tracks.
•¢: Skips to the beginning of the next or succeeding tracks.
When using the remote control, press 4/1or ¢/¡.
If you turn the 4/¢control (or press 4/1or ¢/¡on the remote control) to select a track while playback is stopped
The selected track starts playback.
15