JVC MX-GA77, MX-GT88 manual Programming the Playing Order of the Tracks --Program Play, Press CD

CANCEL

/ DEMO

Continued

Programming the Playing Order of the Tracks —–Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

•To use Repeat play (see page 19) for Program play, press REPEAT after starting Program play.

•This function does not work for MP3 discs.

On the unit ONLY:

1 Load CDs.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press PROGRAM so that	PROGRAM
“PROGRAM” appears on the
display.

The PRGM (program) indicator also lights up on the display.

•All Disc play is selected automatically. You cannot select One Disc play for Program play.

TRACK	P R G M
WOOFER	ALL DISC

•If a program has been stored in memory, the program is called up.

3		CD 1 CD 2	CD 3
	Press one of the disc
	number buttons (CD1, CD2,
	and CD3) to select the disc
	number you want to play.
	Disc number	Program step number
		TRACK	P R G M

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

6 Press CD 6.

The tracks are played in the order you have programmed.

To stop during play, press 7.

To exit from Program play, press PROGRAM again before or after play so that the unit enters All Disc play. (The program you have made is stored in memory until you turn off the unit, eject the carrousel, or erase the program.)

• Program play is also canceled when you press 0.

To modify the program

Before playing, you can erase the last programmed track shown on the display by pressing CANCEL/DEMO.

•Each time you press the button, the last programmed track is erased from the program.

To check the program during play, perform the following procedure:

•You can check only the programmed tracks on the current disc at one time.

1Press CD 6to pause Program play.

2Turn the 4/¢control.

The programmed tracks on the currently selected disc appear on the display in the programmed (or reverse) order.

•If tracks on another disc have been programmed, “PAUSE” appears on the display.

To check the programmed tracks on another disc, press CD 6twice, then turn the 4/¢control.

•Pressing CD 6again starts Program play from the track currently shown on the display.

To add tracks in the program before play, simply select the disc numbers and/or track numbers you want to add by following steps 3 and 4 of the programming procedure.

WOOFER

Track number

4 Turn the 4/¢control to select the track number, then press SET.

Each time you select a track and press SET, the selected track number is added to the track number indicator.

•You can select up to the 99th track on each disc.

ALL DISC

SET

To erase the entire program before or during play, press 7

twice.

•Turning the power off or ejecting the carrousel will also erase the stored memory.

If you try to program a 33rd track

“FULL” will appear on the display.

If you have programmed a track from an empty tray, or a track number that does not exist on the disc

Such program steps will be skipped.

TRACK	P R G M
WOOFER	ALL DISC

If there is an MP3 disc on the disc tray

Even if you add tracks on the MP3 disc to the program in step 3 to 5, those tracks will be skipped.

18