Life Fitness Rear-Drive Cross-Trainer manual Position urethene band

Life Fitness Rear-Drive Cross-Trainers

How To… Install the Clevis Repair Kit (Continued)

Service Tools Require: Phillips Screwdriver, Wire Brush & Two 9/16” Wrenches

Service Kit: GK61-00002-0046

OO--RingRingPedaledalLeverLever

9.Install the new SHAFT provided into the PEDAL LEVER BUSHINGS.

10.Install the new RUBBER O-RINGS onto the shoulder of the BUSHINGS.

BushingBushing ShaftShaft

11.Insert the beveled edge of the DELRIN WASHER over the BUSHING and under the new RUBBER O-RING.

12.Compress the DELRIN WASHERS on both sides of the PEDAL LEVER and insert the PEDAL LEVER into the CLEVIS HORSESHOE BRACKET.

13.Align the holes of the PEDAL ARM and ROCKER ARM, and re-install the previously removed BOLT and NUT. Tighten the BOLT and NUT securely

14.Position the urethane band just above where the clevis covers.

15.Using the provided SCREWS, re-install the FRONT and REAR PLASTIC CLEVIS COVERS.

16.Pull the URETHANE BAND down over the CLEVIS COVER as far as possible.

17.Repeat the procedure for the remaining CLEVIS JOINT.

DELRINDelrinWasherWasher

O--Ringing

InstallingInstallingthethePedalp l leverLever

Position urethene band
Position the Urethene Band	Stretch band over clevis covers
	Stretch the Urethene Band Over
2	the Clevis Covers
	M051-00K61-B076