1.Assemble the CROSS MEMBER (3) onto the FRAMES (1) using four M10 X 135mm BOLTS (7), eight 3/8" SAE WASHERS (4), and four M10 NYLOCK NUTS (6) as shown. Tighten all the BOLTS and NUTS secure- ly.
2.Assemble the TRAY (2) onto the FRAMES (1) using four M10 X 25mm BOLTS (5) and four 3/8" SAE WASHERS (4) as shown. Tighten all the BOLTS securely.
3.Apply desired decals (8 & 9) onto tray (2).
