1.Assemble the SEAT FRAME (1) to the BASE FRAME (2) using two M10 X 25mm BOLTS (3), four 3/8" SAE WASHERS (4) and two M10 NYLOCK NUTS (5) as shown. Tighten the BOLTS and NUTS securely.
2.Assemble the SEAT PAD (6) to the SEAT FRAME (1) using two M10 X 35mm BOLTS (7) and two 3/8" SAE WASHERS (4). Tighten the BOLTS securely.
3.Assemble the BACK PAD (8) to the SEAT FRAME (1) as shown using two M10 X 35mm BOLTS (7) and two 3/8" SAE WASHERS (4). Tighten the BOLTS securely.
4.Install 1” HOLE PLUGS (9) in all open bolt holes.
