LifeSource UB-328 manual Systolic Diastolic Pulse

TAKING YOUR BLOOD PRESSURE

6.After the cuff is fully inflated, it will automatically start to deflate and ❤ symbol will appear to indicate that measurement is in progress. Once the pulse is detected, the symbol will flash with each pulse beat.

7.When measurement is complete, the systolic and diastolic pressure and pulse rate readings are displayed. The cuff will automatically deflate completely, expelling all remaining air.

8.Press START button once to turn off power. The device has an automatic power-down feature which turns off power automatically one minute after measurement is obtained.

SYSTOLIC

DIASTOLIC

PULSE

9.Remove monitor and make a note of your blood pressure and pulse rate on the chart in the back of the manual, indicating date and time of measurement. Additional logbook charts can be downloaded and printed for free at www.LifeSourceOnline.com or in Canada, www.autocontrol.com.

We advise that you record the date and time after each measurement because an accurate blood pressure history relies not on single or sporadic readings but on a pattern over time.

NOTE: Allow at least 5 minutes between measurements on the same person.

NOTE: If you have poor blood circulation in winter (especially when your hands and wrists are cold), you may not get a blood pressure measurement.

E-6 LifeSource Health Line (Toll-Free): 1-888-726-9966