LifeSource UT-202 Taking Your Temperature Switching the Unit of Measure, While the unit is OFF

TAKING YOUR TEMPERATURE SWITCHING THE UNIT OF MEASURE

1.Make sure the lens is clean before measuring (lens can be cleaned with an alcohol moistened cotton swab).

2. Press the SCAN button for one second. The thermometer will power on and will perform a self test.

3. Once the self-test is complete the thermometer will beep, the last measurement taken will appear on the display. Thermometer is now ready for measurement.

4.Press and hold the SCAN button.

Insert the thermometer tip gently into the ear.

5.Slowly move thermometer in a circular motion for 1-2 seconds (the thermometer is performing multiple scanning sequences within eardrum).

6. Release the SCAN button and wait for the beep. Remove thermometer from ear canal. The temperature is displayed.

7.To take another measurement, repeat steps 4–6. It is recommended you wait 5 seconds between measurements.

8.The thermometer will automatically power off after one minute of non-use.

9.Clean lens with an alcohol moistened cotton swab when finished.

To switch between Fahrenheit and Celsius, follow these steps:

While the unit is OFF:

1.Press and release the SCAN button to turn the unit ON

2. Wait for the display to show --F°or --C°

3.Before the last measurement is displayed, quickly press and release the SCAN button. You can now switch between F° and C°

4.The thermometer is ready to use when the Ready symbol () is displayed. Follow steps #4-6 on page E-6.

E-6	www.LifeSourceOnline.com	LifeSource Health Line (Toll-Free): 1-888-726-9966	E-7
		In Canada (Toll-Free): 1-800-463-5414