ProSpecTM Track Lighting 26000
Page 3 of 4
Track Mounting and Power Feed Systems
Track
Stem Mounting Kits
Mounts to a 4” Octagon outlet box. Use two per 4’ track, three per 8’ and 12’ track. When making a run of track do not exceed 4’ between stems. Use addi- tional stems for additional support. Power is fed to the track with the stem closest to the track
Floating Invisible Feed
Can be mounted anywhere along the track at a maxi- mum distance of 4’ from edge of track extrusion. Accepts conduit or cable with 3/8” or 1/2” electrical connector (by others). Can be used with Feed Track, Live End, “L”, “T”, “X”, and
26082 Zinc Plated
Power Extension Connector (Live End)
Replaces Dead End Cover at end of track to permit power continuity around structural obstructions to another track section. Not polarized. Can be fed directly from surface or from ceiling using a 3/8” or 1/2” electrical connector (by others).
26046WH Matte White
26046BK Matte Black
18” Stem 48” Stem
Actual length for ceiling to top of track:
| 17 3/8” | 47 3/8” |
Matte White | 7584 | 7586 |
Matte Black | 7683 | 7681 |
3" or 4" Octagon Outlet Box
(by others)
This end may be field cut.
Stem
NPSM Thread
Clamp Set
Feed Track
Electrical Fitting (by others)
Wire Cover
Clamp Set
Feed Track
Stem Extension Kit
Mounts to any system kit to extend its length to 48”. Cannot be field cut.
7582 Matte White
7680 Matte Black
Power Ext.
Over Beam or Through Beam
Line
Joint
See Detail A (pg. 4)
Beam
Swivel Stem Mounting Kits
Adjusts from 0° to 90°. Can be field cut. 48” stem.
7480 Matte White
7481 Matte Black
3" or 4" Octagon Outlet Box
(by others)
0° - 90° Ceiling
Slope
Stem Extension
1/2" O.D. Steel
Tube
1/4 - 18 NPSM
Thread.
Clamp Set
3/8" Connector
Track
Power Extention
Connector
Wall
Jump
Track
Power Extention Connector
This end may be field cut.
Stem
Clamp Set
Feed Track
Through Wall or Column 3/8" Connector
| Jump (Conduit) |
Track | Track |
Power Extention | Power Extention |
Connector | Connector |
Wall
