HP CP4005 To use another, Load Tray Type Size, For help press Loading, Program, Do not Power OFF

Control panel message	Description	Recommended action
	DIMMS
LOAD TRAY 1:	Tray 1 is loaded and configured for a type and	1.	If the correct paper is loaded, press .
[TYPE] [SIZE]	size other than the one specified in the job.	2.	Otherwise, remove the incorrect paper
			and load Tray 1 with the specified paper.
alternates with		3.	If prompted, confirm the size and type of
			paper loaded.
LOAD TRAY 1:		4.	Confirm that the media guides are in the
[TYPE] [SIZE]			correct position.
For help press		5.	To use another tray, remove paper from
			Tray 1 and then press .
LOAD TRAY 1:	This message appears when Tray 1 is	Load the correct paper in Tray 1 and press
[TYPE] [SIZE]	selected but is not loaded, and no other paper		to continue.
	trays are available for use.	If prompted, confirm the size and type of
For help press		paper loaded.
LOAD TRAY 1:	This message appears when Tray 1 is	1.	Load the correct paper in the tray.
[TYPE] [SIZE]	selected but is not loaded, and other paper	2.	If prompted, confirm the size and type of
	trays are available for use.
To use another			paper loaded.
		3.	Otherwise, select another tray.
tray press
Alternates with
LOAD TRAY 1:
[TYPE] [SIZE]
For help press
LOAD TRAY X	This message appears when Tray XX is	Load the correct paper in the tray and
[TYPE] [SIZE]	selected but is not loaded, and no other paper	press to continue.
	trays are available for use.
For help press
LOAD TRAY X	Tray XX is either empty or configured for a	1.	Load the paper tray with the specified
[TYPE] [SIZE]	type and size other than specified in the job,		media.
	and another paper tray is available.	2.	Confirm that the media guides are in the
To use another
			correct position.
tray press		3.	If prompted, confirm the size and type of
alternates with			paper loaded.
LOAD TRAY X		4.	To use another tray, press .
[TYPE] [SIZE]
For help press
Loading	Programs and fonts can be stored on the	No action necessary. Do not turn the printer
program X	printer’s file system and are loaded into RAM	off.
	when the printer is turned on. The number XX
DO NOT POWER OFF	specifies a sequence number indicating the
	current program being loaded.

ENWW Control panel messages 171