HP CP4005 Tray X Empty, Tray X Open, Tray X SIZE= Size, Type Mismatch, Tray X=TYPE, JOB Name

Control panel message	Description	Recommended action
		4.	Close the image transfer unit and then
			close the top and front covers.
		5.	If the error persists, contact HP Support
			at http://www.hp.com/support/ljcp4005.
TRAY X EMPTY	The specified tray is empty and the current	Refill the tray at a convenient time.
[TYPE] [SIZE]	job does not need this tray to print.
alternates with
Ready
TRAY X OPEN	The specified tray is open or not closed	Close the tray.
For help press	completely.
alternates with
Ready
TRAY X SIZE= [SIZE]	The size selected from the menu has been	No action is necessary.
Setting saved	saved.
TYPE MISMATCH	The media type loaded in the tray does not	1. Adjust the side and rear guides against
TRAY X=[TYPE]	match the media type configured for the tray.		the paper.
		2.	If necessary, press after the tray is
For help press			closed to change the paper size or type
alternates with			to match the paper loaded in the tray.
Ready
Unable to mopy job	The print job cannot be mopied because of a	Install additional memory in the printer.
alternates with	memory or configuration problem. Only one
	copy will be produced.
Processing...
Unable to Store Job	A job cannot be stored because of a memory	Install additional memory in the printer.
JOB NAME	or configuration problem.
alternates with
Processing...
USB ACCESSORY	This message appears when a connected	Press to see step by step information.
ERROR	USB accessory draws too much power.
	When this happens, the ACC port is disabled
For help press	and printing stops.
USE TRAY X	The printer is offering a selection of alternate	1. View tray configurations (type and size)
[TYPE] [SIZE]	media to use for the print job.		using	and .
		2.	Press	to select a tray to use.
To change press /
		3.	To return to the previous message,
To use press
			press Back.
Wait for printer	RAM disk settings have been changed before	No action necessary.
	the printer automatically restarts, or external

ENWW Control panel messages 181