HP CP4005 manual Loading custom-sized media into Tray 2 and optional Tray

5.Insert the tray into the printer. The printer will display the tray’s media type and size. If the configuration is not correct, press the key when the printer prompts you to configure the tray for type and size. (For more information, see Configuring a tray when loading paper.)

6.If the configuration is correct, press to clear the message.

Loading custom-sized media into Tray 2 and optional Tray 3

To use custom media, you must change the size setting on the control panel to custom and set the unit of measure, X dimension, and Y dimension. See Configuring a tray to match print job settings for more information.

1.Remove tray from the printer.

2.Slide the media width guides all the way open and adjust the rear media-length guide to the length of the paper being used.

ENWW Configuring input trays 93