HP CP4005 manual Control panel settings for automatic two-sided printing

Control panel settings for automatic two-sided printing

Many software applications allow you to change two-sided print settings. If your software application or printer driver does not allow you to adjust two-sided printing settings, you can adjust these settings through the control panel. The factory default setting is OFF.

CAUTION Do not use two-sided printing when printing on labels. Serious damage could result.

To enable or disable two-sided printing from the printer control panel

NOTE Changing settings for two-sided printing through the printer control panel affects all print jobs. Whenever possible, change settings for two-sided printing through your software application or printer driver.

NOTE Any changes made in the printer driver will override settings made using the printer control panel.

1.Press Menu to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to select PRINTING.

5.Press to highlight DUPLEX.

6.Press to select DUPLEX.

7.Press or to select ON to enable two-sided printing or OFF to disable automatic two-sided printing.

8.Press to set the value.

9.Press Menu.

10.Select two-sided printing from your software application or printer driver, if possible.

ENWW Two-sided (duplex) printing 111