HP CP4005 Card Slot, Not Functional, Chosen Personality, Not Available, Cleaning Disk X% Complete

Control panel message	Description	Recommended action
The supplies gauge will display the		3. Remove the incorrect print cartridge.
consumption levels of print cartridges.		4.	Install the correct print cartridge.
		5.	Close image transfer unit and then close
			the top and front covers.
Calibrating...	The printer is calibrating.	No action necessary.
Canceling... X	The printer is in the process of canceling a	No action necessary.
	job. The message will continue to be
	displayed while the job is stopped, the paper
	path flushed, and any remaining incoming
	data on the active data channel is received
	and discarded.
CARD SLOT X	The flash card in slot X is not working	1. Turn the printer off.
NOT FUNCTIONAL	correctly.	2. Remove the card from the slot indicated
			and replace with a new card.
Checking paper path	The engine is turning its rollers to check for	No action necessary.
	possible paper jams.
Checking printer	The engine is doing an internal test.	No action necessary.
CHOSEN PERSONALITY	PJL encountered a request for a personality	1.	Press	for detailed information.
NOT AVAILABLE	that did not exist in the printer. The job is
	aborted and no pages will be printed.	2.	Press	and to step through the
			instructions.
alternates with		3.	Reprint using the correct driver for the
			device.
CHOSEN PERSONALITY
NOT AVAILABLE
For help press
CLEANING DISK X% COMPLETE	A storage device is being cleaned. Do not	No action necessary.
	turn the printer off. When the process is
	complete, the printer will automatically
	restart.
Cleaning...	A cleaning page is being processed.	No action necessary.
Clearing event log	This message is displayed while the event log	No action necessary.
	is cleared. The printer will exit the MENUS
	once the event log has been cleared.
Clearing paper path	The printer jammed or detected misplaced	No action necessary.
	paper when turned on. The printer is
	attempting to eject jammed pages
	automatically.

CLOSE FRONT COVERS	The top cover needs to be closed.
For help press

Close front covers.

NOTE This message might also appear if the fuser is missing or incorrectly installed. Ensure that the fuser is correctly installed.

Close top cover. The top cover of the printer is open. Close the top cover.

ENWW Control panel messages 167