HP CP4005 manual Values, Restricted from Printing in Color, Size Mismatch, Tray X=SIZE, Supplies

Control panel message	Description	Recommended action
	a restore action, such as RESTORE COLOR
	VALUES.
Restoring...	The printer is restoring factory settings.	No action necessary.
factory settings
RESTRICTED FROM PRINTING IN COLOR	The printer is set to COLOR IF ALLOWED	Get your network administrator to set the user
alternates with	and you or your software program are not	or program permissions that will allow you to
	authorized to print in color.	print in color.
Ready
Rotating [COLOR]	A component test is in progress; the	Press Stop when ready to stop this test.
motor	component selected is the <color> cartridge
	motor.
To exit press. Stop
Rotating motor	The printer is executing a component test and	Press Stop when ready to stop this test.
To exit press. Stop	the component selected is a motor.
Setting saved	A menu selection has been saved.	No action necessary.
SIZE MISMATCH	The tray is loaded with media longer or	1. Adjust the side and rear media guides
TRAY X=[SIZE]	shorter in the feed direction than the size		against the paper.
	configured for the tray.	2.	If necessary, press			after the tray is
For help press			closed to change the paper size or type
alternates with			configuration to match the size or type
			in the tray.
Ready
Sleep mode on	The printer is in sleep mode. A button press,	No action necessary.
	receipt of printable data, or an error condition
	will clear this message.
SUPPLIES IN	At least one supply item is incorrectly	1.	Press	to access the SUPPLIES
WRONG POSITION	positioned in the printer and another supply		STATUS menu.
	item is missing, incorrectly placed, out, or low.	2.	Press	and	to highlight the specific
alternates with
			supply that has a problem.
For status press		3.	Press	to view help for the supply.
		4.	Press	and	to step through the
			instructions.
Transfer unit can	The cartridge is either not installed or not	1. Open the top and front covers.
be easily damaged.	correctly installed in the printer.
				CAUTION		The image
alternates with				transfer unit can be easily
				damaged.
For help press
		2.	Open the image transfer unit.
The supplies gauge will display the
		3. Insert the print cartridge and make sure
consumption levels of print cartridges.
			that it is fully seated.

180 Chapter 8 Problem solving ENWW