HP CP4005 manual HP LaserJet Tough paper, Preprinted forms and letterhead, Paper type Paper weight

Paper type	Paper weight
Heavy and extra-heavy stock	105-163 g/m2
	28-43 lb
Cardstock	164-220 g/m2
	43-58 lb
Intermediate	90-105 g/m2
	24-28 lb
HP Tough paper	5 mil

When printing on heavy paper types, use the following guidelines:

●Use Tray 1 for paper that is heavier than 120 g/m2 (32 lb).

●For optimum results when printing on heavy paper, use the printer control panel to set the media type for the tray to HEAVY 105-120 G/M2.

●In either the software application or the driver, select Heavy as the media type, or print from a tray that is configured for heavy paper.

●Because this setting affects all print jobs, it is important to return the printer back to its original settings once the job has printed. See Configuring input trays.

CAUTION In general, do not use paper that is heavier than the media specification recommended for this printer. Doing so can cause misfeeds, paper jams, reduced print quality, and excessive mechanical wear.

HP LaserJet Tough paper

When printing on HP LaserJet Tough paper, use the following guidelines:

●Handle HP LaserJet Tough paper only by the edges. Oils from your fingers deposited on HP LaserJet Tough paper can cause print quality problems.

●Use only HP LaserJet Tough paper with this printer. HP products are designed to work together for optimum printing results.

●In either the software application or the driver, select TOUGH PAPER as the media type, or print from a tray that is configured for HP LaserJet Tough paper.

Preprinted forms and letterhead

Observe the following guidelines for best results with preprinted forms and letterhead:

●Forms and letterhead must be printed with heat-resistant inks that will not melt, vaporize, or release undesirable emissions when subjected to the printer’s fusing temperature of approximately 190°C (374°F) for 0.1 second.

●Inks must be non-flammable and should not adversely affect any printer rollers.

ENWW Printing on special media 97