Control panel message

Description

Recommended action

 

 

 

 

 

 

 

 

[FS] DEVICE

The file system device is protected and no

1.

To enable writing to the Flash Memory,

WRITE PROTECTED

new files can be written to it.

 

turn off write protection, using HP Web

 

 

Jetadmin.

 

 

To clear press

 

2.

To clear the message, press the

key.

alternates with

 

3.

If the message persists, turn the printer

Ready

 

 

off then on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[FS] FILE

The printer received a PJL file system

1.

Use HP Web Jetadmin software to

 

 

SYSTEM IS FULL

command that attempted to store something

 

delete files from the Flash Memory and

on the file system but was unsuccessful

 

try again.

 

 

To clear press

because the file system is full.

2.

To clear the message, press the

key.

 

alternates with

 

3.

If the message persists, turn the printer

Ready

 

 

off then on.

 

 

 

 

 

 

 

 

 

 

 

 

 

[FS] NOT

The device has not been initialized.

You can use Web JetAdmin to initialize the

INITIALIZED

 

device.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ABCDEFGHIJ

This message is displayed when a paper path

No action necessary.

 

 

0110000000

sensor test or a paper path test is run. The

 

 

 

 

 

alphabetical value indicates which sensor is

 

 

 

 

 

alternates with

being checked.

 

 

 

 

 

 

 

 

 

 

 

To exit press. Stop

 

 

 

 

 

 

 

 

 

 

 

Access Denied

An attempt has been made to modify a menu

Contact the printer administrator to change

MENUS LOCKED

item while the control panel security

settings.

 

 

mechanism is enabled by the printer

 

 

 

 

 

 

administrator. The message will disappear

 

 

 

 

 

 

shortly, and the printer will return to Ready

 

 

 

 

 

 

state.

 

 

 

 

 

 

 

 

 

 

 

BAD DUPLEXER

The duplexer is not connected properly and

Turn the printer off.

 

 

CONNECTION

must be reinserted before printing can

Press to see step by step information.

continue.

alternates with

 

 

 

 

 

 

For help press

 

 

 

 

 

 

 

 

 

 

 

 

 

BAD OPTIONAL TRAY

The 500-sheet input tray is not making proper

1.

Verify that the printer is on a level

 

 

CONNECTION

connection with the printer.

 

surface.

 

 

 

2.

Turn the printer off.

 

 

 

 

 

 

 

 

3.

Reseat the printer on the 500-sheet

 

 

 

input tray.

 

 

 

 

4.

Turn the printer on after reseating the

 

 

 

500-sheet input tray.

 

 

 

 

 

 

 

 

 

BLACK CARTRIDGE IN

The black cartridge is installed in the wrong

1.

Open the top and front covers.

 

 

WRONG POSITION

slot and the cover is closed.

 

 

 

 

 

 

 

 

CAUTION The image

 

 

 

 

 

 

 

 

alternates with

 

 

 

transfer unit can be easily

 

 

 

 

 

damaged.

 

 

 

 

 

 

 

 

For help press

 

 

 

 

 

 

 

2.

Open the image transfer unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

166 Chapter 8 Problem solving

ENWW

Page 182
Image 182
HP CP4005 manual Write Protected, FS File, System is Full, FS not, Initialized, Abcdefghij, Menus Locked, BAD Duplexer