HP CP4005 manual Display brightness, Setting the display brightness

9.Press to accept the selection.

10.Press or to select custom or Off.

11.Press to accept the selection.

12.Press or to select the hour.

13.Press to accept the selection.

14.Press or to select the minutes.

15.Press to accept the selection.

16.Press or to select AM or PM.

17.Press to accept the selection.

18.Press to enter APPLY TO ALL DAYS.

19.Press or to select YES or NO.

20.Press to accept the selection.

21.Press or to select the days of the week to which WAKE TIME applies.

22.Press to accept each selection.

23.Press Menu.

Display brightness

The display brightness feature allows you to set the level of brightness for the control panel display. The allowable range of values is 1 through 10. The default for this feature is 5.

To change or set the display brightness, use the following steps:

Setting the display brightness

1.Press Menu to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight SYSTEM SETUP.

5.Press to select SYSTEM SETUP.

6.Press to highlight DISPLAY BRIGHTNESS.

7.Press to select DISPLAY BRIGHTNESS.

8.Press or to highlight the desired value.

9.Press to accept the selection.

10.Press Menu.

60 Chapter 2 Control panel ENWW