Clearing jams

Each section below corresponds with a jam message that might appear on the control panel. Use these procedures to clear the jam.

Jam in Tray 1

1.Open Tray 1.

2.Remove loaded paper from Tray 1.

3.Reload paper in Tray 1 and check to make sure the media is loaded correctly. NOTE Do not load media above the fill tabs.

4.Confirm that the guides are in the correct position.

5. To continue printing, press , and then press .

186 Chapter 8 Problem solving

ENWW

Page 202
Image 202
HP CP4005 manual Clearing jams, Jam in Tray