5.Press to highlight a JOB NAME.

6.Press to select the JOB NAME. PRINT is highlighted.

7.Press to select PRINT.

8.Press or to select the first digit of the PIN.

9.Press to select the digit. The number changes to an asterisk.

10.Repeat steps 8 and 9 to enter the remaining three digits of the PIN.

11.Press when finished entering the PIN.

12.Press or to select the number of copies.

13.Press to print the job.

Deleting a private job

A private job can be deleted from the printer control panel. You can delete a job without printing it, or it will be automatically deleted after it is printed.

1.Press Menu to enter MENUS. RETRIEVE JOB is highlighted.

2.Press to select RETRIEVE JOB.

3.Press to highlight your USER NAME.

4.Press to select your USER NAME.

5.Press to highlight a JOB NAME.

6.Press to select the JOB NAME.

7.Press to highlight DELETE.

8.Press to select DELETE.

9.Press or to select the first digit of the PIN.

10.Press to select the digit. The number changes to an asterisk.

11.Repeat steps 9 and 10 to enter the remaining three digits of the PIN.

12.Press when finished entering the PIN.

13.Press to delete the job.

Mopier mode

When Mopier mode is enabled, the printer produces multiple, collated copies from a single print job. Multiple-original printing (mopying) increases printer performance and reduces network traffic by sending the job to the printer once, then storing it in the printer’s RAM. The remainder of the copies are printed at the printer’s fastest speed. Documents can be created, controlled, managed, and finished from the desktop, which eliminates the extra step of using a photocopier.

118 Chapter 4 Printing tasks

ENWW

Page 134
Image 134
HP CP4005 manual Mopier mode, Deleting a private job