Control panel message

Description

Recommended action

 

 

 

 

STORAGE FULL

 

4.

For 68.1 errors, use the HP Web

 

 

 

Jetadmin software to delete files from

 

 

 

the disk drive.

 

 

5.

For 68.1 errors that persist, contact

 

 

 

HP Support.

 

 

 

 

 

68.X PERMANENT

A non-volatile storage device is full. Pressing

1.

Press

to continue.

STORAGE WRITE FAIL

the button should clear the message.

2.

If the message persists, turn the printer

Printing can continue, but there may be

 

unexpected behavior.

 

off then on.

 

X Description

3.

If the problem persists, contact

 

 

 

HP Support at http://www.hp.com/

 

0 for onboard NVRAM

 

support/ljcp4005.

 

1 for removable disk (flash or hard)

 

 

 

 

 

 

 

 

68.X STORAGE ERROR

One or more printer settings saved in the non-

1.

Press

to continue.

SETTINGS CHANGED

volatile storage device is invalid and has been

2.

If the message persists, turn the printer

reset to its factory default. Pressing the

For help press

button should clear the message. Printing

 

off then on.

can continue, but there may be unexpected

3.

If the problem persists, contact

alternates with

behavior.

 

 

HP Support at http://www.hp.com/

68.X STORAGE ERROR

 

 

support/ljcp4005.

 

 

 

 

SETTINGS CHANGED

 

 

 

 

 

 

 

69.X PRINTER ERROR

A printer error has occurred.

Turn the printer off then on. Press for more

For help press

 

information.

 

 

 

 

 

alternates with

 

 

 

 

69.X PRINTER ERROR

 

 

 

 

To continue

 

 

 

 

turn off then on

 

 

 

 

 

 

 

 

79.XXXX

A critical hardware error has occurred.

1.

Turn the printer off then on.

PRINTER ERROR

 

2.

If the problem persists, contact

To continue

 

 

HP Support at http://www.hp.com/

 

 

support/ljcp4005.

turn off then on

 

 

 

 

 

 

 

 

[FS] DEVICE

A device failure has occurred on the specified

1.

To clear the message, press the key.

FAILURE

drive. Printing can continue for jobs that do

2.

If the message persists, remove and re-

not require the Flash DIMM.

To clear press

 

 

install the EIO disk drive.

 

3.

Turn the printer back on.

alternates with

 

 

4.

If the message still persists, replace the

Ready

 

 

 

Flash DIMM.

 

 

 

 

 

ENWW

Control panel messages 165

Page 181
Image 181
HP CP4005 manual Storage Write Fail, Storage Error, Settings Changed Printer Error, FS Device, Failure