HP CP4005 manual Remove at least one print cartridge To exit press. Stop

Control panel message	Description	Recommended action
PRINT CARTRIDGES
To exit press. Stop

Remove at least one print cartridge.

To exit press. Stop

The printer is executing a disable cartridge	Remove one print cartridge.
check or component test where the
component selected is the cartridge motor.

REPLACE [COLOR]	The identified print cartridge has reached the	1.	Order the appropriate print cartridge.
CARTRIDGE	end of life and the COLOR SUPPLY OUT	2.	To continue, press .
	setting in the SYSTEM SETUP menu is set
The supplies gauge will display the	to STOP AT OUT. Printing can continue.	3.	Open the front and top covers and then
consumption levels of print cartridges.			open the image transfer unit.
alternates with
				CAUTION The image
				transfer unit can be easily
				damaged.
The supplies gauge will display the
		4.	Remove the identified print cartridge.
consumption levels of print cartridges.
		5.	Install a new print cartridge.
		6.	Close the image transfer unit and the top
			and front covers.
		7.	Supplies ordering information is also
			available from the embedded Web
			server. See Using the embedded Web
			server for more information.
REPLACE FUSER KIT	The fuser kit has reached the end of its life.	1.	Open the top cover.
	Replace the fuser kit. Printing can continue	2.	Grasp the purple handles on the fuser
For help press	although print quality might be reduced.
			unit.
		3.	Remove the old fuser unit from the
			printer.
		4.	Install a new fuser unit and secure with
			thumb screws.
		5.	Close the top cover.
		6.	Supplies ordering information is also
			available from the embedded Web
			server. See Using the embedded Web
			server for more information.
REPLACE FUSER KIT	The fuser is nearing the end of its useful life	1.	Order the fuser kit.
	and the REPLACE SUPPLIES setting in	2.	To continue printing, press .
For help press	the SYSTEM SETUP menu is set to STOP
alternates with	AT OUT. Printing can continue.	3.	To replace the fuser kit, perform the

following steps:

REPLACE FUSER KIT

● Open the top cover.

● Grasp the purple handles on the fuser unit.

ENWW Control panel messages 177