HP CP4005 manual At Out

Control panel message Description Recommended action

● Remove the old fuser unit from the printer.

● Install the new fuser unit. ● Close the top cover.

● Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information.

REPLACE SUPPLIES	Multiple supplies are at the end of their useful	1.	Press	to access the SUPPLIES
	life and the REPLACE SUPPLIES setting in		STATUS menu.
	the SYSTEM SETUP menu is set to STOP	2.	Press	and	to highlight the specific
The supplies gauge will display the	AT OUT.
			supply that has a problem.
consumption levels of print cartridges.		3.
			Press	to view help for the supply.
		4.	Press	and	to step through the
			instructions.
		5.	Supplies ordering information is also
			available from the embedded Web
			server. See Using the embedded Web
			server for more information.
REPLACE SUPPLIES	Multiple supplies are at the end of their useful	1.	Press	to access the SUPPLIES
For status press	life. If the supplies affected are cartridges		STATUS menu.
	only, printing has stopped because the	2.	Press	and	to highlight the specific
The supplies gauge will display the	REPLACE SUPPLIES setting in the
	SYSTEM SETUP menu is set to STOP AT		supply that has a problem.
consumption levels of print cartridges.	LOW. If the affected supplies are cartridges	3.	Press	to view help for the supply.
	only, printing will not continue.
		4.	Press	and	to step through the
			instructions.
		5.	Supplies ordering information is also
			available from the embedded Web
			server. See Using the embedded Web
			server for more information.
REPLACE SUPPLIES	The printer is set to continue printing even	Press to see step by step information.
Override in use	though a print cartridge has reached end of
	life.

alternates with	CAUTION Using the Override
<Current status message>	mode can result in unsatisfactory
	print quality. HP recommends
	replacing the supply when the
	REPLACE SUPPLIES Override in
	use message appears. The
	HP Supplies Premium Protection
	Warranty coverage ends when a
	supply is used in Override mode.

REPLACE SUPPLIES

Using black only

alternates with

This message is generated when a print	Press to see step by step information.
cartridge (or print cartridges) has reached the
out condition and the printer is set to
AUTOCONTINUE BLACK.

178 Chapter 8 Problem solving ENWW