HP CP4005 manual Printer response problems, Control panel display is blank, Printer does not print

Printer response problems

Control panel display is blank

Table 8-10No display message

Cause and solution

Cause	Solution
The printer’s on/off button is in the standby position.	Verify that the printer is on. Fans might run while the printer is
	in standby mode (off).
The printer’s memory DIMMs are defective or installed	Verify that the printer’s memory DIMMs are correctly installed
incorrectly.	and are not defective.
The power cord is not firmly plugged into both the printer and	Turn off the printer and then disconnect and reconnect the
the power receptacle.	power cord. Turn the printer back on.
The line voltage is incorrect for the printer power configuration.	Connect the printer to a proper voltage source, as specified on
	the Power Rating Label on the back of the printer.
The power cord is damaged or excessively worn.	Replace the power cord.
The power source receptacle is not working correctly.	Connect the printer to a different power receptacle.

Printer does not print

Table 8-11Printer is on, but nothing prints

Cause and solution

Cause	Solution
The printer’s Ready indicator light is not lit.	Press Stop to return the printer to the Ready state.
The top cover is not closed properly.	Close the top cover firmly.
The Data indicator light is flashing.	The printer is probably still receiving data. Wait for the Data
	indicator to stop flashing.
REPLACE [COLOR] CARTRIDGE appears on the printer	Replace the print cartridge specified on the printer display.
display.
A printer message other than Ready appears on the printer	See Control panel messages.
control panel.
The output bin is full.	Remove some or all of the media in the output bin.
The PS (PostScript Emulation) personality is not selected.	Select PS or AUTO for the printer language. For more
	information, see Changing printer control panel configuration
	settings.

The correct driver is not selected in the software application or printer driver.

Select the driver for PostScript Emulation for this printer in the software application or printer driver. For more information, see Printer drivers or Printer drivers for Macintosh computers.

The printer is not properly configured. See Changing printer control panel configuration settings.

ENWW Printer response problems 199