HP LaserJet CP4005 Disabling/enabling sleep mode, Setting the wake time, Wake time

8.Press or to select the appropriate time period.

9.Press to set the time period.

10.Press Menu.

NOTE If media is loaded in optional Tray 3 when the printer is in sleep mode, the printer will not sense new media when it comes out of sleep mode. This could cause the printer to use wrong paper for a print job. Be sure to wake the printer before loading media in optional Tray 3.

Disabling/enabling sleep mode

1.Press Menu to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight RESETS.

5.Press to select RESETS.

6.Press to highlight SLEEP MODE.

7.Press to select SLEEP MODE.

8.Press or to select ON or OFF.

9.Press to set the selection.

10.Press Menu.

Wake time

The wake time feature allows you to instruct the printer to wake at a certain time on selected days, to eliminate waiting for the warm-up and calibration periods. You must have SLEEP MODE on to set the wake time.

To set or change the wake time, use the following steps:

Setting the wake time

1.Press Menu to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight SYSTEM SETUP.

5.Press to select SYSTEM SETUP.

6.Press to highlight WAKE TIME.

7.Press to select WAKE TIME.

8.Press or to select the day of the week.

ENWW Changing printer control panel configuration settings 59